PulseBrick data sheet.
A fixed-function, air-cooled ultrashort pulse laser source for OEM integration. The values below describe the current nominal configuration, with their definitions and reference conditions.
Data sheet · Release 1 · 19 October 2026. Request configuration-specific integration documentation from our team.
Nominal values.
Defined references.
The supplied laser’s test report identifies its actual operating point, measured results and test conditions. Nominal values are not a substitute for that record or for configuration-specific acceptance limits.
| Parameter | Nominal value | Definition / reference |
|---|---|---|
| Average output power | 10 W | Factory output setpoint. Refer to the unit report for measured output. |
| Pulse energy | 25 µJ | Nominal mean at 400 kHz and 10 W. |
| Pulse repetition rate | 400 kHz | Nominal operating point; no customer-adjustable rate range is specified. |
| Pulse duration | 800 fs | Nominal final output. Measurement definition and conditions belong to the unit report. |
| Central wavelength | 515 nm | Standard output wavelength. |
| Beam waist diameter | 2 mm | 1/e² intensity diameter; waist located 100 mm beyond the output aperture. |
| Beam quality | M² < 1.5 | Current specification. Use the unit report for measured results and applicable conditions. |
This table contains the nominal operating configuration. Separate worst-case safety-calculation assumptions are not operating settings or advertised performance.
Source, controls
and installation.
PulseBrick is intended for qualified integration into an OEM machine or optical system. Use the approved configuration-specific drawings and instructions for detailed design and commissioning.
| Item | Current configuration | Integration reference |
|---|---|---|
| Laser head | 17.5 kg | Four platform mounting feet and front accessory mounting interface. Approved drawings define mounting, handling and beam datums. |
| Cooling | Air cooled | Preserve ventilation and the approved installation clearances. |
| Routine user controls | On/off; pulse energy adjustable up to 25 µJ | 25 µJ nominal at 400 kHz and 10 W. The unit report defines calibrated output; intermediate commands need not produce a linear optical response. |
| Intended analogue interface | Differential 0–10 V command | Standard calibration target: 10 W at 10 V, subject to factory calibration and verification. |
| Power | Two supplied 24 V adapters | Separate housekeeping and high-power roles. Adapter capacity does not describe measured laser consumption. |
| Optional monitoring | Factory-configured digital status | Availability and interface details depend on the supplied configuration. |
| Intended use | Class 4 OEM laser source | Qualified integration and application-specific protective measures are required for the completed machine. |
Nominal operating environment: clean indoor, non-condensing operation at 15–27 °C. Confirm dimensions, mounting limits, cooling clearances, environmental limits, electrical behaviour and protective recovery in the configuration-specific documentation for your unit.
Routine output commands do not provide safe access. The completed machine requires its own assessment of beam delivery, focusing, materials, guarding, interlocks and process hazards.
Specify the configuration together.
Sales and integration: sales@pulsebrick.com
Technical documentation and service: service@pulsebrick.com